[guide]safest way to over clock Samsung Galaxy y s5360 merruk Technology 2.5

Till day before yesterday I had some paranoid thoughts regarding overclockling … but finally came did some logical thinking and decided to overclock sgy (running Hyperion 8)

As it was my first oc I decided to follow this great guide made by
BiswajitBarman
http://forum.xda-developers.com/show…php?p=33879798
Although it is a really nice guide it didn’t work properly on Hyperion 8 . I also searched many other guides and videos regarding this but none of them really worked 100% (although one guide did work almost perfectly on Hyperion 7 it failed to work on h8)

Following were the bugs I was experiencing
*root access denied by super su
*unable to underclock below 1.2 ghz
*link to SD problems and root denied
*random reboots
*hot reboot doesn’t work and screen freezes if u hit on it and had to pull battery etc etc

So after a whole day of research, trial and error, some suggestions from deadly and others, bricking unbricking flashing via Odin etc etc I finally deviced a fully working easy guide with no bugs to flash meeruk kernel 2.5 on h8 and overclock it to 1.2Ghz 

All the problems stated above are eliminated by this method except for the hot reboot function
Phone still freezes if u hit on it but the reboot works just fine and the phone doesn’t take that long to reboot either (about 30seconds )
Other than that no other bugs afaik

NOTE- ALTHOUGH THE METHOD WAS DESIGNED FOR HYPERION …. IF U ARE HAVING SOME PROBLEMS WITH OC ON ANY OTHER ROM … TRY THIS METHOD IT MAY WORK IF IT (IF IT DOESNT U CAN TELL YOUR PROBLEM ALONG WITH THE ROM NAME HERE (NOT PM) AND ME OR SOMEONE IN MAGAPRESS WILL TRY TO HELP

OK to the procedure now (it may be long but its easy and works perfectly
Note that if u do not follow my instructions properly bricking is guaranteed (or it may not work properly)

THINGS U NEED
*superuser.apk (use only this super user)
Download: Click Here
*Kernel Update.zip
Download: Click Here
*Merruk technology2.0.tar
Download: Click Here
*Elite modules.zip
Download: Click Here
*Ext4-Converter-signed.zip
Download: Click Here

I assume u already have root explorer installed on ur phone (flashing stock is not really necessary but ur choice)

INSTALLATION PROCEDURE

Part 1
*download the paste all the files given above and paste it in the root of your SD card
*copy the super user.apk and paste it in systemappshere and set permissions to rw-r-r using root explorer
*now in the same place where u pasted superuser.apk search for the super su.apk (or any other equivalent that u were using) and delete it
*reboot phone
*now open superuser
*go to settings and UNCHECK outdated binary notification
*do not update the version of superuser I provided

Part 2
*go to SD card in root explorer and search for the MerrukTechnology_Pre-2.0.tar I u just downloaded and extract it (hope u pasted all downloaded files directly in SD)
*u will get the boot.img (before that make sure u do not have any other boot.img on the root of ur SD)
*now boot into cwm
*make a backup (imp)

Part 3
*now go to mounts and storage make sure system,data,SD,cache,sdext all are mounted (if not mount them all)
*go back and hot install zip from SD and select the kernel update.zip
*it search for boot.img and install it
*after that go back and check if everything is mounted (this time its 100% necessary that all are mounted so mount them all if they are not mounted)
*now go back and choose install zip from SD and choose Ext4_Converter-signed.zip
*after success wait for a while (30 secs) and hit back (if u get an error, pull battery boot into recovery and do the part 3 again but its unlikely that u will get one)
*now wipe cashe (marok recommends this)
*reboot system
*if u enter a boot loop, awesome go to part 4
If u do not enter a boot loop and if ur system boots..! Something has gone wrong do part 3 again

Part 4
*pull battery and boot to recovery
*u will notice u r in meeruk kernal’s cwm recovery
*mount everything
*go rom backup and restore and simply restore the backup u just made
*trust me ur old kernel will not be restored and u will still have meeruk kernel 2.5
*after everything is restored reboot
*u should phone should boot now
*wait and if u r in a boot loop do 3,4 parts again (its unlikely if u followed my procedure carefully)

Part 5
*after phone is booted and all media scanning is complete
*set ur require settings in CPU controle and Chek apply on boot and apply
*u may NOT get a notification saying CPU control has been granted super user permission but it says values applied … that’s fine
*reboot to recovery
*mount everything
*choose zip from SD
*select 1-EliteKernelModules.zip
*reboot system after completion
*now after boot u will notice that link to SD ,CPU control and all root apps are asking superuser permission (lol) grant them
*NOTE- ALWAYS SET MINIMUM FREQUENCY TO 312 MHz (this eliminates random reboots)
* and enjoy

The over clock works like charm for me with the following settings

and I can play games like air penguin, subway surfers,raging thunder 2 and many more without lag and without cf3d… I also player armv6 ported nfs shift with just texture reduced without lag

8 thoughts on “[guide]safest way to over clock Samsung Galaxy y s5360 merruk Technology 2.5

  1. by systmeappshere he ment….go to system/apps/and paste it here
    by the way this works TY….my phone always restarted and now i found a solution😀

  2. how can i fix screed freezz..?that is so awsome but if the screen freezz after screen off haw can i make a phone call..when i hit on it it will reboot..pls give me some solution..

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s